Pair DynaPro Go Device via Bluetooth

DynaPro Go device can be paired via Bluetooth by following the below steps:

  1. Go to settings in your Computer/Laptop/Tablet. Click on the Search tab in the Laptop and type Settings and select it.
    Settings

  2. In the Windows Settings screen, select Devices
    Settings

  3. In Bluetooth & other devices screen, select Add Bluetooth or other device button
    Settings

  4. Add a device popup opens
    Settings

  5. Select Bluetooth in the popup
    Settings

  6. Power On your DynaPro Go device and make sure the device’s active connection is set to Bluetooth LE, using the steps by pressing the keypad buttons on the DynaPro Go in this order:
    Left function key, 4, 5, 6, Right function key.
    If prompted “Switch to Bluetooth mode ?” select Yes.
    If prompted “Switch to USB mode ?” select No.
    Settings

  7. Clicking upon Yes button, the bluetooth initialization starts.
    Initialization

  8. Now Press Left Function Key 1 2 3 Right Function Key to enable the device to accept Bluetooth LE pairing requests for up to three minutes. The device indicates it is accepting pairing requests, and displays the remaining time.
    Pairing timer

  9. On the host(laptop/computer), scan for Bluetooth devices, and select the device you want to pair to.
    Pairing timer

  10. The device responds to the pairing request by showing a 6-digit passcode on the display.
    Pairing timer

  11. The host software should show a matching passcode. Click on Connect.
    Pairing timer

  12. If both the codes match, then click on Yes button on the DynaPro Go device. The paring completes here and device shows up a message as below.
    Pairing complete

  13. You can see your device connected via Bluetooth on your machine.
    Pairing complete